|
| FAQ |
 General
Knowledge of SunTown Therapeutic Machines
and trouble shooting autonomic nervous
1. Why the machine works well, but
no feel?
1) The black conducting side of curative electrode
plates does not touch skin;
2) Use one of curative electrode plates only,
or each one for 2 persons, without current
loop;
3) The flannelette cover is not steeped completely.
New cover should be steeped with hot water
and no water drops;
4) Output cable has bad contact with the curative
electrode plates;
5) Check the contact between output cable
and curative electrode plates, if there is
black oxidation at the contact, remove it
and can use it continuously.
2. Why should cover be steeped?
1) Allow input energy evenly, conduction equally;
2) The cover should be disinfected, avoid
across infection for multi-persons；
3. Why can or can not feel locally?
Now and then can or can not feel locally:
Fault1: The output cable is connected false,
should check and replacing.
Fault2: The change of body location will influence
local dosage.
4. During treatment, how to deal if
output is getting lower？
Patients feel output getting lower, because
body adapts it locally. It is normal and can
increase output.
5. Is the machine is abnormal, if
2 of the curative electrode plates feel different?
When the curative electrode plates act at
the same point or different point, it is normal
to feel differently.
6. Treatment time and period?
Treatment time is the time for each treatment,20~40minuts
normally; period of treatment is the phase
time for a disease, 10 days normally.
7. Why there is a break between period
of treatment?
The break can eliminate “tiredness” of local
tissue causing by stimulating point of body
long time, allow better treatment of next
period. The break is 3 days. |
|
|
|
|
